What To Do If Arrow Vanes are Getting Damaged by Contact at Rest

Arrow vanes are an important part of a bow hunter's equipment, but they can be easily damaged by contact with hard surfaces. Following some simple tips in this blog post, you can help prevent damage to your arrow vanes and keep your equipment in top condition.

If you're a bow hunter, you know that the arrow vane is crucial for stabilizing your shot. But what do you do when those vanes start getting damaged?

In this blog post, we'll provide some tips on how to avoid vane damage so you can keep your arrows in top condition.

Why It Occurs

When you fire an arrow, the vanes that stabilize the arrow in flight come into contact with the arrow rest. Over time, this contact can cause the vanes to become damaged or even detached from the arrow. There are a few reasons why this happens.

  • When an arrow is fired, the force of the shot sends vibrations through the entire shaft. These vibrations are distributed and absorbed by different parts of the bow and having a bow stabilizer helps it a lot. If any of the parts are damaged, a lot of these vibrations are transmitted to the rest and vanes. The vanes can flex and absorb some of these, but they can only take so much before they start to break down. Over time, this can result in the vanes becoming worn and damaged, which can affect the accuracy and performance of the arrow.
  • If your arrow rest are not fixed properly, they can also cause the vanes to become damaged. When the arrow rest moves during the shot, it can cause the vanes to rub against the side of the bow. This can damage the vanes and cause them to come off the arrow.
  • Another reason vanes can become damaged is if they're not properly secured to the arrow shaft. The adhesive that holds the vanes in place can break down over time, especially if you are hunting in extreme environments. This can cause the vanes to come loose and hit your arrow rests, and eventually fall off completely. Arrow vanes are held in place by a relatively weak adhesive, so they can become detached if they experience too much force.
  • The vanes are made of a relatively soft material, so they can be easily damaged by the hard surface of the arrow rest.
  • Finally, the vanes are subject to friction as they rotate against the arrow rest. This friction can cause them to wear down over time.

As a result, it is important to inspect your hunting arrows regularly and replace the vanes if they show signs of damage.

Some Things That You Can Do

There are a few things you can do to avoid vane damage.

1. Check your arrows regularly.

Before each hunting season, it's a good idea to inspect your arrows for wear and tear. If you notice any damage to the vanes, replace them before using the arrows.

Make sure your bow is properly tuned in. Also, be sure the string is not too tight or too loose. And make sure that the vane is attached properly.

After each hunting trip or practice session, take a few minutes to inspect your arrows for damage. If you notice any damaged vanes, replace them before using the arrows again.

2. Use a vane saver.

A vane saver or guard is a small piece of rubber or plastic that fits over the ends of the vanes and protects them from impact. Though these are not commonly used, vane savers are inexpensive and easy to find and can protect your arrow fletchings. You can also use specific coatings that prevent abrasion and extend the life of vanes.

3. Inspect your Arrow Rest

If your arrow rest is not fixed properly, it can cause the vanes to become damaged. Make sure the arrow rest is properly aligned with the string. If you're using a recurve bow, be sure the arrow rest is not too high or too low. If it is, tighten it or replace it with a new one.

Also, use an arrow rest that will not damage the vanes. Some rests, like rubber containment rests, can cause vane damage. Some rests are designed for specific types of bows, so make sure you're using the right rest for your bow.

4. Use Quality Arrows.

The quality of the arrows you use can make a big difference in how well they hold up over time. Investing in a good quality arrow can save you money in the long run by reducing the need to replace vanes and arrows as often.

5. Store Arrows & Bows Properly.

Bows and Arrows should be stored in a cool, dry place out of direct sunlight.  If you live in a humid climate, it's a good idea to store your arrows in a moisture-proof container. You should also avoid exposing your arrows to extreme temperatures, as this can not only damage the vanes but also affect the arrow rest which in turn will damage your vanes.

6. Keep Your Arrows & Arrow rest Clean.

Accumulation of dirt and debris on your bow and arrows can cause the vanes to become damaged. When cleaning, be sure to remove all dirt, grime, and debris. You should also avoid using harsh chemicals or solvents on the arrows, as these can damage the vanes.

7. Use the Right Vane.

There are many different types of vanes available on the market. Some vanes are designed for specific uses, while others can be used for any type of shooting. If your vanes are too large, they can brush against your arrow rest.

8. Nocking of the Arrow

If the arrow is not properly knocked, it can cause the vanes to become damaged. Sometimes even twisting the arrow nocks a little can solve your vane clearance issue.

Arrows vanes can be an important part of your bow-hunting equipment, especially if you use recurve bow. They are delicate but taking care of them will help them perform better. Whatever setup you choose, practice with your setup so that you can rely on it when you are on the field.


Following these simple tips, you can avoid vane damage and keep your arrows in top condition. And make sure to buy the best hunting vanes that won't get damaged easily.

We have done the research for you and compiled a list of the best hunting vanes. Just tap the button below to check out our article and pick one of our top choices for a great hunting experience.

Check out the Best Hunting Vanes

Also, check out some of our other articles:

6 Best Ground Blind for Bowhunting for You to Stay Hidden
If you’re a bowhunter, you know that the key to success is to stay hidden. That’s why finding the best ground blind for bowhunting is so important. Check out our guide on the best ground blinds for bowhunting and
Find out How to Camouflage a Ground Blind (A Quick Read)
Ground blinds offer many advantages, but they can also be easily spotted if they’re not properly camouflaged. In this blog post, we’ll provide some helpful tips on how to effectively camouflage your ground blind so you can get the most out of your hunting trip.
Read Quickly to Find out How to Adjust a Crossbow Scope
A crossbow scope is a necessity for any hunter using a crossbow. The scope allows the hunter to have a more accurate shot, which increases the chances of taking down the prey. In order to have the most accurate shot possible, the hunter must know how to properly adjust the crossbow scope.