How to Nock an Arrow with a Drop-Away Rest (A Quick Read)

A drop-away arrow rest improves accuracy by ensuring a clean release of the arrow. It is easy to use, just make sure to nock the arrow on the string a little bit differently than with a traditional rest. Dive it to know more!

A drop-away rest is a device used to support the arrow on the bowstring. It is designed to "drop away" when the bow is fired so that there is no contact between the arrow and the rest. This ensures that the arrow will be released cleanly and with minimal friction, which will improve accuracy.

Nocking an arrow with a drop-away rest is slightly different from nocking an arrow with a traditional rest, but it's not difficult once you know how. Let's take a closer look.

Things to Consider Before Setting Up The Arrow Rest

There are a few things you need to take into account when setting up a drop-away arrow rest:

Size of your arrow

For arrows 16" or less in length, use a drop-away arrow rest that is 0.75" or less in height. For arrows greater than 16" in length, use a drop-away arrow rest that is 1.0" or more in height.

Weight of your arrow

The weight of your arrow should not exceed 85% of the draw weight of your bow. For example, if you have a bow with a draw weight of 50 pounds, then the maximum weight for an arrow would be 42.5 pounds.

Draw Weight of your bow

The draw weight is the amount of force required, measured in pounds, to pull the bowstring back to its full length. A higher draw weight will cause your bow to shoot arrows faster and with more force. This means that you will need to raise your arrow rest higher off the bow to ensure that the arrow clears the bow before it is released.

You can set your arrow rest closer to the bow for lower draw weight. This will help keep the arrow centered on the bowstring and improve accuracy. If you are not sure what the draw weight of your bow is, you can check the manufacturer's website or the label on the bow.

Some general tips:

1) You need to make sure that the arrow rest is level with the bow arm. This will help ensure that the arrow flies straight and true.

2) If you are using a drop-away arrow Rest, you need to be sure that it is properly adjusted so that it will release the arrow at the right time. You should also test it out on a few different arrows to make sure that it is releasing them consistently.

3) Make sure that your bowstring is in good condition and has the correct amount of twists per inch (TPI). A low TPI can cause the arrow to veer off course, while a high TPI can make it difficult to nock the arrow properly.

4) When you are nocking the arrow, be sure to do so gently. You don't want to damage the fletching or arrow shaft.

Nocking an Arrow

1. First, you'll need to find the nocking point on your bowstring. This is the spot where the arrow will sit when it's nocked (mounted) on the string. The nocking point is usually marked by a small metal ring or an indentation in the string.

2. Once you've found the nocking point, open up the jaws of your rest and place the arrow in them so that the nock (the plastic or metal clip at the rear end of the arrow) rests on the nocking point.

3. Make sure that the arrow is pointing in the right direction and that the fletching (the feathers or vanes on the arrow) is not touching the rest.

4. The groove in the shaft of the arrow should be lined up with the string. Place your index finger above the arrow and your middle finger below the arrow. Apply gentle pressure to hold the arrow in place. If placed correctly, you will hear a clicking sound.

5. Use your thumb and forefinger to grab the string above the arrow. You want to be sure to grab the string in the middle so that it is evenly balanced on both sides. Close the jaws of the rest around the shaft of the arrow to secure it in place.

6. Draw your bow back and aim. When you're ready to release, simply let go of the string and allow the rest to "drop away" from the arrow. The arrow should fall cleanly off of the string and into your target!

Check out this helpful video from PSE archery :


If you're a bowhunter or archer, then you know that having a well-tuned and accurate setup is crucial for success in the field. That's why it's important to learn how to properly nock an arrow, regardless of what type of rest you're using. With a little practice, nocking an arrow with a drop-away rest will become second nature!

And if you are in search of the best drop-away arrow rest, we've got you covered. We've gathered the top picks for the best drop-away arrow rest, so you can make the best choice for your needs. Simply click the button below to see our top picks. You won't be disappointed!

Check out the best drop away arrow rests.
nocking an arrow

Also, Check out some of our other quick reads:

Big or Small: A Quick Read on the Sizes of Hunter Boots
One of the most important pieces of equipment for a hunter is a good pair of boots. They need to be comfortable and should provide good support and traction. When choosing a pair of hunting boots, it is important to pay attention to the fit. Find out more about their sizing in this quick read.
A Simplified Guide on How to Sight In Your Red Dot
Learn how to sight in a red dot so that you can hit your target every time. This guide explains the basics of sighting in a scope, as well as specific tips for sighting in your favorite red dot optic.
Does Yellow-Tinted Shooting Glasses Improve Your Accuracy?
If you’ve ever wondered why most shooting glasses are yellow, the answer is actually quite simple. Keep reading to learn more about the science of shooting glasses and how they can help improve your accuracy.