Blogs

Finally Get Your Shots on Target: A No-Nonsense Guide to Calibrating Your Laser Bore Sighter

Stop missing your shots and upgrade your accuracy with our step-by-step guide on how to calibrate your laser bore sighter. Say goodbye to frustrating shooting sessions and hello to hitting your target every time.

Sayak

Feb 1, 2023 • 9 min read

Are you tired of missing your targets at the range or while hunting because your shots are just a little off? Do you want to improve your accuracy and make the most out of your time at the range? Well, have no fear because a properly calibrated firearm can make all the difference!

A laser bore sighter is an essential tool for any shooter, allowing you to quickly and accurately align your firearm's barrel with your target. And if you know how to calibrate a laser bore sighter, you can make sure your shots hit exactly where you aim every time.

Don't confuse this with Lidar Boresight calibration, the process of aligning LiDAR boresight angle with respect to the mechanical axis of its mount. Even though the lidar sensor works based on a laser system, sighting rifles and guns is a much easier process.

In this comprehensive guide, we'll walk you through the entire process of boresight calibration and share some tips and tricks. So buckle up and get ready to take your shooting game to the next level!

Preparation

Before you start calibrating, it's important to make sure you have all the right tools and equipment. Here's what you'll need:

· Laser Bore Sighter

· Target

· Gun Vise or some form of shooting sticks

· Gun Cleaning supplies (optional)

· Safety devices like earmuffs, safety glasses, etc.

Once you have all the necessary tools, it's time to prepare your firearm for calibration. Here are the steps you'll need to follow:

· Clean your firearm: Make sure your firearm is clean and free of any debris that could affect the accuracy of the calibration process.

· Secure your firearm: Mount your gun on a vise or tripod (or rifle bipod) or shooting bags to securely hold your firearm in place. This will allow you to adjust the bore sight without worrying about the firearm moving.

· Choose a target: Select a target that is at least 25 yards away from your shooting position. This will allow you to see the laser beam clearly and make any necessary adjustments.

It's important to keep safety in mind when preparing your firearm for calibration. Always make sure the firearm is unloaded and pointed in a safe direction. And, always wear appropriate safety devices like safety goggles and electronic earmuffs for protection.

Now that you have all the tools and have prepared your firearm, you're ready to start calibrating your laser bore sighter!

To Clean your firearms with ease and precision check out our favorite ultrasonic gun cleaners.

How to Calibrate a LASER Bore Sighter: A Step-by-Step Guide

Now that you have all the necessary tools and have prepared your firearm, it's time to calibrate your laser bore sighter. Don't worry, it is nowhere close to the complication levels of something like calibrating lidar data and you need not worry about things like strip alignment and boresight angles.

The purpose of zeroing in on the laser dot is to align it with your scope or iron sights so that when you fire, there will be no discrepancy between what you are seeing through the scope/iron sights and what appears when looking at where the bullet lands on the target practice paper or other surface being used for calibration purposes.

Also, check out our article on the Best Rifle Slings

Here's a step-by-step guide to help you get started:

· Turn on the laser bore sighter: Make sure the laser is turned on and has a sufficient battery and place it in the chamber or attach it to the end of the barrel of your firearm, depending on the type of your bore sight.

· Align the laser with the target: Use the adjustment screws to align the laser beam with the center of the target.

· Fine-tune the alignment: Make small adjustments to the laser bore sighter until the laser beam is perfectly aligned with the center of the target.

· Check the alignment: Take a step back and make sure the laser beam is centered on the target. If it's not, make any necessary adjustments and repeat the process until it is.

· Repeat the process: Repeat the above steps for each shot you want to calibrate. Keep in mind that some firearms may require multiple shots to be calibrated.

Tips for a Successful Calibration:

· Take your time: Rushing the calibration process can result in inaccurate results. Make sure to take your time and make small, gradual windage and elevation adjustment to prevent any misalignment.

· Double-check your work: After calibrating each shot, double-check your work to make sure the laser beam is still aligned with the center of the target.

· Practice makes perfect: Calibrating a bore sighter takes practice, so don't get discouraged if it takes a few tries to get it right.

· Choose your target and works area carefully: If you are worried about bipod bounce, pick a gun bag or vise to give a more stable platform for test firing.

With these steps and tips, you're now ready to calibrate your laser bore sighter like a pro!

Verifying the Boresight Calibration

Verifying the accuracy of your calibration to ensure that your shots are hitting exactly where you aim every time you shoot. Here's how to do it easily:

Shoot at the target: Using the same firearm and ammunition that you used to calibrate the laser bore sighter, shoot at the target from the same distance as the calibration process.
Compare the shots: Compare the location of the shots on the target to the laser beam from the bore sighter. If the shots are hitting within an inch or two of the laser beam, the calibration is accurate.
Make any necessary adjustments: If the shots are not hitting within an inch or two of the laser beam, make any necessary adjustments to the laser bore sighter and repeat the accuracy verification process.
Test at different distances: It's also a good idea to verify the accuracy of your firearm after it has been bore-sighted by using it at different distances to make sure it's still accurate. You may need to make additional adjustments for longer-range shots.

It's important to keep in mind that the accuracy can be affected by many factors, including the specific ammo you use, the type of firearm, and the conditions at the range (or field).

So, don't be discouraged if you get a boresight error. Make a few adjustments to get the results you're looking for. And, with a little practice, you'll be able to hit the bullseye every time!

The Benefits of Using a Laser Bore Sighter

Here are just a few of the benefits of using a laser bore sighter:

Saves time: you can quickly and easily align your sights with the target, save time and get more shooting done in a shorter period.
Improves accuracy: you can ensure that your shots are hitting exactly where you aim, improving your accuracy and overall shooting performance.
Easy to use: simple and easy to use, making them a great option for shooters of all levels, from beginners to experienced marksmen.
Versatile: You can use them with a wide range of firearms, from shotguns to rifles, and also for different scopes and sights, making them a versatile tool for any shooter.
Cost-effective: Compared to other sight-aligning tools, laser bore sighters are relatively inexpensive and can be a cost-effective solution for improving your shooting accuracy.

Final Thoughts

In conclusion, laser bore sighters offer a range of benefits for shooters of all levels, from improved accuracy to saving time at the range. With their ease of use and cost-effectiveness, these are a must-have tool for anyone looking to take their shooting and rifle hunting performance to the next level.

If you're ready to experience the benefits of using a laser bore sighter for yourself, be sure to check out our article on the best laser bore sighters available. Whether you're a beginner or an experienced shooter, our article can help you find the best options for your needs and budget. So don't wait, start improving your shooting accuracy today!